150 SQUARE FOOT CABLE SYSTEM 240V

(No reviews yet) Write a Review
Availability:
1 business day
Shipping:
Calculated at Checkout
COVERAGE AREA:
150 SQ. FT.
VOLTAGE:
240 VOLTS
TOTAL SIZE OF CABLE SYSTEM:
600 LINEAR FT.
THIS SYSTEM CONSISTS OF:
1 SPOOL
CABLE GUIDES:
INCLUDED
INSTALLATION MONITOR:
INCLUDED
TOTAL AMPS:
7.5
TOTAL WATTS:
1800
HEAT OUTPUT:
12 WATTS/ SQ. FT.
OHM RANGE:
20-41
COLD LEAD:
10 FT.
CABLE THICKNESS:
1/8"
CABLE SPACING:
3"
TYPE OF FLOOR USE:
TILE, SLATE, STONE, TREATED CEMENT, LAMINATE FLOOR, ENGINEERED WOOD, AND CARPET. FLOORING SHOULDN'T BE THICKER THAN 1.25"
MADE IN THE USA:
MANUFACTURED IN SPRING GROVE, IL
WHAT'S INCLUDED?:
SPOOL HEATING SYSTEM, CABLE GUIDES, INSTALLATION MONITOR, & INSTRUCTION MANUAL
UL LISTED FOR U.S. AND CANADA:
UL 1673,UL FILE # E310385
$629.00
Adding to cart… The item has been added

Cable System  The cable electric floor heating system is a heating cable rolled on a spool that is laid out by the installer 3” apart across the area to heat. The wire is run back and forth across the area to heat, using the included plastic cable guides to secure it to the floor with the cold lead running up the wall to the electrical box. These heating systems will allow you to easily heat any shaped area including odd angles and turns.  The RED HEATING ELEMENT CAN NOT BE CUT, so be sure to accurately measure the space you are heating. For assistance please see Tips for Choosing the Right Size System.  This system must be completely embedded in a self-leveling mortar 1/4" to 1/2" thick.  Use only polymer modified cement based mortars.  The heating system should be installed on concrete or concrete backer board.

The included cable guides can be secured to the subfloor with screws, nails, adhesive or glue approved for use with the given subfloor.  The cable guides can also be cut to length.
Additional
cable guides can be purchased. 

The included installation monitor can help give you peace of mind while installing the floor warming system.  Connect the system leads to the monitor prior to installation.  The monitor will "scream" a warning in the event the heating element is cut or damaged allowing you to make any necessary repairs before the heating system is embedded in mortar. 

 

 

 



Videos Hide Videos Show Videos